JMICRON DOS DRIVER

Will try to find different firmware which may be used for this device, just with JMicron chipsets, this is not really easy Robert Willert [ You might also want to read these other posts It’s not clear to me yet whether libatasmart does an invalid operation, or whether a valid operation triggers a kernel bug, so I keep both tasks open for now. The bytes b1 02 90 are two x86 instructions mov cl, 0x02; nop; See previous reply. With df[6] set, the option ROM does not detect any disks, despite spending several minutes. Don’t want to remove devicekit-disks because 78 other packages also will be removed then.

Uploader: Taukinos
Date Added: 24 August 2010
File Size: 30.86 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 24684
Price: Free* [*Free Regsitration Required]

Even with devicekit-disks uninstalled, the device won’t show up. Zitat von maxbox im Beitrag 9 Here the IDs: Do i need to fix a checksum value as well? The USB-harddisk is not recognized and dmesg shows me again all this errors.

With df[6] set, the option ROM does not detect any disks, despite spending several minutes.

ExpressCard SATA Adapters: The Lesser of Two Evils

If it turns out that moving away the udev rules file helps, please keep the drive plugged in, then do the following commands, and check dmesg after each one for the USB resets. Dual-purpose devices concern me, since they leave more opportunity for vendors to cut corners or fail to properly integrate hardware and software, so Doz decided to stick to a single-purpose device.

  ASUS A7N8X-E USB 2.0 DRIVER

I’m using this kernel: This happens with kernels older than 2. Define the content of the pm-notification here. This seems to put the controller in AHCI mode.

ExpressCard SATA Adapters: The Lesser of Two Evils – Stephen Foskett, Pack Rat

Generally I’m not sure if jmicroj is any problem with Hard Disk Sentinel, it attempts to identify the drives, detect and display the status information in all possible ways – if the RAID chip and the USB bridge chip both allows that. USB disconnect, address 19 [ Before the win 8. Thank you for contacting StarTech. Unfortunately, the file is quite different. Download full text 3.

So, if I understand correctly, something prevents this application from start and it is not possible to start it until the problem is resolved. Jmkcron offlined – not ready after error recovery [ Sorry, forgot to update CRC.

JMicron JMB363 Add-on Card AHCI mode

The problems with configuration register 0x are more problematic. The size is correct for the combined drive, but since it sees it as 2 separate drives the total size is doubled and drive numbers are now different from what Windows reports. Spam Netiquette Form other This post contains unwanted Spam.

  CRONOS ON DEVILDRIVER DRIVER

The blacklisting works for me. The JMicron is still positive. Bug Watch Updater bug-watch-updater on And suddenly, even without restarting, my USB hard drive just kmicron working again. Don’t want to remove devicekit-disks because 78 other packages also will be removed then. Actually, there is only one sata connexion, not two.

Unfortunately, I do not know enough about hex editing to find where to patch. Has your contact with JMicron been restored by any chance? This way the new version will automatically use all statistics, settings, license if present etc.

There can be some limitations of some special JMicron chipsets but according the experiences, StarTech devices contain the “good” chipsets so yes, both drives and their status information should be completely detected and displayed in Hard Disk Sentinel.

This problem dosen’t happens with kernel 2. Wed May 21, 6: Looks like devicekit-disks is our problem. I am experiencing similar problems on Ubuntu karmic doe the latest updates and kernel 2.